Home » L Series Peristaltic Spares » L10 Pump Spares

L10 Pump Spares

10mm rubber hose

Minimum Recommended Spares for the L10 Peristaltic Pump

Common consumables required for a hose change for the L10 are listed below. All hose material options shown but only 1 hose is required in addition to new replacement lubricant.

 

Part Code
DescriptionQTY per pump
EPSL-10-NRHNatural Rubber Hose for our L10.1
EPSL-10-NRH-FGNatural Food Grade Rubber Hose for our L10.1
EPSL-10-NIT-INDNitrile Rubber Hose for our L10.1
EPSL-10-NIT-FGNitrile Food Grade Rubber Hose for our L10.1
EPSL-10-EPDMEPDM Rubber Hose for our L10.1
EPSL-10-CSPECSPE Rubber Hose for our L10.1
ROLLERLUBE-5LTR5 litres of Envirolube (0.75 litres required) .1

Additional Spares for the L10 Peristaltic Pump

Typically required after many years of use.

 

Part Code
DescriptionQTY Per Pump
L-10-ROL-1Roller for our L10.2
L-10-ROL-B-1Roller Bush for our L10.4
L-10-ROL-SH-1QRoller Shaft for our L10.2
L-10-FC-DS-1PFront cover door seal for our L10.1
LC-4013Hose Clips/Clamps for our L10.2
L-10-HC-11/4" BSP Hose Connector for our L10.2

Quick Contact Form